MUCAR VO8 Best Professional Car Diagnostic Tool Obd2 Car Scanner Automotive Diagnose ECU Coding Active Test 34 Reset Free Update

Why do you need MUCAR VO8?

1.【Free Software Upgrade】：34 resets+OE-Level alI system diagnostic+ECU Coding+ Action Test 2 years free update, these functions can still be used after 2 years, just cannot be updated, need to pay $399 per year to update.

2.【All System Diagnostics 】:The MUCAR VO8 obd2 scanner diagnostic tool can perform OE-level diagnosis and analysis on all available systems: ECM, TCM, ABS, SRS, BCM, BMS, TPMS, and A/C system, etc. Through reading/erasing codes, viewing live data, retrieving ECU info, and performing active tests & service functions. With quick update frequency, you can update it once a week to cover newer models.

3.【34+ Resets & 10 High-End Functions】:The 100% original MUCAR VO8 scanner for car provides 34+ reset functions for mechanics to do daily auto maintenances in workshops, such as Oil Reset, TPMS Reset, IMMO, ABS Bleeding, Injector Coding, Throttle Adaptation, Gear Learning, Suspension Reset, Seats Calibration, etc. ➤You will get 10+ high-end functions if you enter the "Diagnostic Report" page, "system" and then "special" functions.

4.【 Bi-Directional Contorl & ECU Coding】: This MUCAR VO8 bidirectional scan tool can output commands to a vehicle’s ECUs, read the ECU data, and monitor the operation of the actuators. Through active tests on certain components, such as fuel pumps, a/c fan, inside mirrors, headlamps, windows, and horns, this bidirectional scanner will let you quickly know whether a specific system, component, or subsystem is functioning properly or not, helping you locate the car issues precisely.

5.【 IMMO Key Programming Tool】:VO8 scanner allows to read PIN code, add new key, disable and delete lost key, reprogram new key fobs, etc…NOTE: This function is available for Asian vehicles. For higher-security vehicles like Benz/BMW/VW need professional key programmers. 

6.【Support more car models】：VO8 car scanner works on most OBDII-compliant vehicles worldwide in US, Europe, Asia, Africa, and Australia for 12V cars, SUV, light truck, hybrids, and even roadster,over 100,000 Vehicles Coverage + Almost ALL OBDI&OBDII Connectors and Cables Included. All connectors and cables included help you easily read different car models without encountering any sort of communication barrier. VO8 brings you the best as your daily business helper and never lets you drop the ball!

7.【More extra functions】: Intelligent AutoVIN +Report Share +4 in 1 Datastream Graph

8.【More Storage 】: 2+32GB Storage ,never worry about downloading software without storage space again.

9.【Added Portable bluetooth connector】: Easy to hang, more convenient to pull and pull, waterproof, oil-draining and shock-proof.

10.【More Languages】:Added to 28 Kinds of Languages:English,German,Spain, French, Italian, Portuguese, Russian, Polish, Turkish, Hungarian,Chinese (Traditional), Greek, Slovakia, Romanian, Arabic, Croatian, Slovenia ,Finland, Japanese, Korean, Czech, Persian, Swedish, Serbian, Danish,Vietnamese, Bulgarian.

11.【Longer Diagnostic Distance】：V4.0 Bluetooth VCI Dongle which supports up to 33 feet of diagnostics distances.

12.【Remote Tech Support】:If you are novice, please don’t worry, we have one-on-one remote assistance service, you just need to sit in front of the computer and watch us help you solve any problem.

13.【Supports AutoAuth for FCA SGW】: Allowing you to unlock protected FCA vehicle SGW module on Chrysler, Dodge, Jeep, Alfa Romeo, and Fiat vehicles manufactured after 2019 and perform diagnostics, such as read/clear codes, data stream, etc. (* Only provide AutoAuth login portal, and need purchase the registration number on the AutoAuth website by yourself ).

14.【Powerful configuration】: Android 8 +2G RAM+ 64G Storage + 8 inches Touch Screen.

15. 【Longer battery life】: 9450mAh battery capacity, don’t have to worry about battery life.

16.【Wifi Upgrade】:After you receive our products, for better product experience as well as car diagnositic, please connect to wifi to update operating system and download car brand diagnostic software.

It does not include the FCA gateway. When the device diagnosis encounters the FCA gateway prompt, it means that the car is equipped with a gateway.
Our equipment can support reading version information, reading fault codes, and reading data streams without purchasing a gateway account;
After purchasing a gateway account, our equipment can support reading version information, reading fault codes, reading data streams, action testing, clearing fault codes, special functions, and maintenance functions.

Available for purchase on the website: https://www.thinkcar.com/
1. Click "Explore" 2. Choose "FCA"

All Cars Full System Diagnostic

The Diagnostics application enables a data link to the electronic control system of the test vehicle for vehicle diagnosis. The application performsfunctional tests, retrieves vehicle diagnostic informationsuch as trouble and event codes and live data for various vehicle control systems, such asABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper Systemetc.

34 Maintenance Resets Services

1.Oil Lamp Reset Service

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Electronic Park Brake Reset

It is important in the maintenance of electronic braking system’s safety and efficiency.

3.BAT Battery Service

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current,register the battery replacement, and activate the rest state of the vehicle.

4.DPF Diesel Particulate Filter Reset

Specially works for Diesel Particulate Filter system with DPF regeneration,DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5.SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle’s ECU,inputting TPMS sensor replacement IDs and testing sensors.

7.IMMO Key Programming

The unique car key programming and read pin code function,it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8.ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9.Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11.Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY.Start the car and drive.Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern.After you follow this programming method of the TCU/ECU drive the car.

12.AFS Headlamp Reset

‘AFS’ means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side,pressing that button means they stay pointing straight ahead and don’t turn when you turn the steering wheel.

13.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled.Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine.In an electronically fuel injected car,a throttle position sensor and air flow sensor communicate with the computer,which supplies the corresponding amount of fuel needed at the injectors.It must need re-learning throttle sensor position after clearing or repair.

15.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

16. EGR Reset

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

17.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up,urea reset operation is required.

19.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.

20.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

21.AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality.When the gearbox is disassembled or repaired (after some of the car battery is powered off),it will lead to shift delay or impact problem.In this case,this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22.Language Change

This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust.lf the Nox fault is re-initialized and the Nox catalytic converter is replaced,it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24.ODO Reset

a)ODO reset is to copy,write,or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable,so that the odometer shows the actual mileage.

b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure,it

is necessary to do ODO reset after maintenance.

25.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode

ln order to reduce power consumption,the following functions may be disabled,including limiting the vehicle speed,not waking up the door opening network,and disabling the remote control key, etc.At this time,the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory,and recover the automatic ascending and descending function of power window.

29.Motor angular position sensor calibration

There is a deviation between the rotor position detected by the angular position sensor of the motor and the actual rotor magnetic field position,and the motor angle needs to be calibrated.

Support vehicle

Acura, BMW,Honda,Lexus,MINI,Toyota

30.Engine power balance

During the power stroke of each cylinder,the power balance monitors the crankshaft acceleration to determine the relative power provided by each cylinder.

Support vehicle：Acura, Chrysler/Jeep/Dodge,Ford,GM,Honda,Hyundai,Infiniti,Kia,Nissan

31.High-voltage battery health detection

Used for high-voltage battery diagnosis and status information detection.

Support vehicle:Acura,BMW,Honda,Lexus,MINI,Mitsubishi,Toyota

32.Intelligent cruise control system calibration

It is used for the replacement and maintenance of the vehicle’s intelligent cruise module.

Support vehicle Audi, BMW,Jaguar,Kia,Land Rover,Lexus,MINI,Mitsubishi,SEAT,Skoda,Toyota,Volkswagen

33.Automatic air conditioning initialization

The vehicle air conditioner replaces the electronic control unit, replaces the actuator or the memory of the electronic control unit memory is lost,and requires air conditioning initialization learning.

Support vehicle:Audi, BMW, Jaguar,Land Rover,Lexus,MINI,SEAT,Skoda,Toyota,Volkswagen

34.GPF regeneration (particle trap regeneration)

After the particle trap is used for a long time, the fuel consumption will increase and the output power of the engine will decrease.At this time,the GPF needs to be replaced or regenerated.Support vehicle

Audi,BMW,Hyundai,Jaguar,Kia,Land Rover,Lexus,MINI,Mitsubishi,Seat,Skoda,Subaru,Toyota,Volkswagen

ECU Coding + Active Test(BI-Directional Control)

ECU Coding

With the advanced ECU coding function, the MUCAR VO8 professional diagnostic scanner empowers you to establish full data links with electronic control units via VCI for vehicle diagnosis, repairs, or coding. It also features online coding and personalization for high-end vehicles:

✔ ECU Coding: Helps re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.

After we replace ECU modules, defective units, or certain parts we need to do the coding to make the replaced parts being stored and recognized by the ECU. Follow the strict procedures of the manufacturer to match, learn, code, and program it until it functions normally. Warm Tips: Before coding, please read and record the original module’s information.

✔ ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.

✔ ECU coding helps to flash some hidden features for vehicles and disable the car’s annoying functions. such as changing the interior light, activating cornering headlights with fog lights, and deactivating buzzing sounds when locking the door, etc.

Active Test (BI-Directional Control)

If the actuator is normal,without using the vehicle’s controls,to get a significant boost in effectiveness: [Turn on the radiator fan|Modulate the throttle|Open/close windows|Operate mirrors|Turn on/off the lights|Turn on/off the sound horn|Test door lock …]

Free Full OBD2 Functions:

Read Codes:Read extensive current, pending andpermanent codes in OBD system quickly

Clean Codes:Clear detected fault codes and turn offthe Check Engine Light efficiently

Live Date:View graphical live data of vehicle’s computer module(s) for easy analyses

Freeze Frame:View the vehicle’s operating parameters at the moment a DTC is detected

I/M readiness:Read I/M readiness status to have a vehicle inspected for state emissions compliance

O2 sensor test:Perform O2 sensor test to check fuel efficiency and vehicle emissions

On-Borad Monitor Test:Read the results of on-board diagnostic monitoring tests for specific components/systems

Car Information Display:Retrieve the vehicle information of VIN,CINs, and CVNs completely

EVAP Test:Perform the component Test by allowing initiating a leak test for the vehicle’s EVAP system

Support 109+ Worldwide Vehicle Coverage

Supported 28 language:

English, German,Spain, French, Italian, Portuguese, Russian, Polish, Turkish, Hungarian,Chinese (Traditional),Greek, Slovakia, Romanian, Arabic, Croatian, Slovenia ,Finland, Japanese, Korean, Czech,Persian,Swedish, Serbian, Danish,Vietnamese, Bulgarian

4 IN 1 Scientific Data Management:

1.Live Data Stream Graph&RecordData&Diagnosis Record Playback&Print Report

2.The professional vehicle scanner toolcan scientific graph data,record data,play back data,freeze frame,and print
reports.

3.In the real-time diagnosis process,important diagnosis information can be instantly stored in the memory,including reading of fault codes and frozen frames and real-time data streams.

4.After real-time diagnosis iscompleted,Diagnosis function record playback,the diagnosis information and process previously saved in the memory can be replayed to facilitate the analysis of various data information.

5.One-click generation of a diagnosis report after diagnosis will help users quickly solve problems,avoid blind maintenance, and save money/time.