Why Do You Need THINKTOOL Mini

5.99-inch display is convenient for you to diagnose the car in real time
2G+32G storage,support bluetooth and wifi connection
Android 10 system can be upgraded online.
Full system diagnostics lifetime free
28 types resets function lifetime free
Supports diagnosis of more than 93 car brands
Software available for subscription,$49.95/car model/year for ECU Coding,Active Test special function

THINKTOOL MINI Supported 17 language:

English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Hungarian, Arabic, Greek, Slovakia, Traditional, Korean, Turkish

THINKTOOL MINI 2 Supported 16 language:

English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Hungarian, Arabic, Greek, Slovak, Traditional, Korean

Lifetime Free All Cars Full System Diagnostic:

The Diagnostics application enables a data link to the electronic control system of the test vehicle for vehicle diagnosis. The application performsfunctional tests, retrieves vehicle diagnostic informationsuch as trouble and event codes and live data for various vehicle control systems,such asABS,SRS,Engine,Transmission,Brake System,Emission System,Fuel system,Light system,Wiper Systemetc.

Lifetime Free All Cars 28 Reset Services:

1.Oil Reset
The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset the mileage or driving time to zero after the maintenance,so the maintenance light will go out and the system will start a new maintenance cycle.

2.Elec.Throttle Adaption(ETS)
Elec.Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.

3.Steering Angle Reset
To reset the steering angle, first find the relative zero point position for the car to drive in straight line.Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.

4.Battery Matching
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery,in which the original low battery fault information will be cleared and battery matching will be done.

5.ABS Bleeding
When the ABS contains air,the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.

6.Break-pad Reset(EPB)
lf the brake pad wears the brake pad sense line,the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad.After replacing the brake pad,you must reset the brake pad.Otherwise,the car alarms.

7.DPF Regeneration
DPF regeneration is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion,fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.

8.Gear Learning
After the engine ECu,crankshaft position sensor,or crankshaft flywheel is replaced,or the DTC’ gear not learned’ is present,gear learning must be performed.

9.IMMO Service
To prevent the car being used by unauthorized keys,the anti-theft key matching function must be performed,so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.

10.Injector Coding
Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.

11.TPMS Reset
Note:Cooperate with wireless tire pressure diagnosis tool to realize TPMS activation,programming and learning functions

12.Suspension Matching
This function can adjust the height of the body.When replacing the body height sensor in the air sus pension system,or control module or when the vehicle level is incorrect,you need to perform thisfunction to adjust the body height sensor for level calibration.

13.AFS Reset
This feature is used to initialize the adaptive headlamp system.

14.A/T Learning
This function can complete the gearbox self-learning to improve gear shifting quality.

15.Sunroof Initialization
This function can set the sunroof lock off,closed when it rains,sliding/tilting sunroof memory function,temperature threshold outside the car etc.

16.EGR Adaption
This function is used to learn the EGR valve after it is cleaned or replaced.

17.ODO Meter Check
Only supports reading the current mileage of the car, does not support modifying the mileage

18.Airbag Reset(SRS)
This function resets the airbag data to clear the airbag collision fault indicator.

19.Transport Mode
ln order to reduce power consumption, the following functions may be disabled,including limiting the vehicle speed,not waking up the door opening network,and disabling the remote control key,etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

20.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.

21.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

22.NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust.lf theNOx fault is re-initialized and the NOx catalytic converter is replaced,it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

23.AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

24.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.

25.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.

26.Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.

27.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

28. Language Change
This function is used to change the systems language of the vehicle central control panel.

Support 126+ Worldwide Vehicle Coverage

1.American Car list:
Need standard obd2 and release year from 1996-now
Chrysler,Ford,GM,Jeep,Lincoln,Buick,Cadillac,Chevrolet,Dodge,HM,ect…

2.European car list:
Need standard obd2 and release year from 2000-now
Mercedes Benz,Smart,Sprinter,BMW,Volkswagen,Skoda,Audi,Opel,Lamborghini,Porsche,Maybach,Ford,Land Rover, Jaguar,Aston Martin,Bentley,Rolls-Royce,Rover,Mini,Vauxhall,DR,Ferrari,Fiat,Abarth,Lancia,Alfa Romeo,Maserati,Bugatti,Peugeot,Citroen,Renault,Saab,Volvo,GM,GMSA,Dacia,Seat,ect …

3.Japanese/Korean car list:
Need standard obd2 and release year from 2008-now
Honda,Acura,Toyota,Scion,Lexus,Mazda,Nissan,Infiniti,Isuzu,Daihatsu,Suzuki,Mitsubishi,Subaru,Samsung,Daewoo,Hyundai,Kia,ect..

Supported languages:

THINKTOOL MINI Supported 17 language:

English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Hungarian, Arabic, Greek, Slovakia, Traditional, Korean, Turkish

THINKTOOL MINI 2 Supported 16 language:

English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Hungarian, Arabic, Greek, Slovak, Traditional, Korean

Support to ECU Coding(49.95$/Year/Car Model):

The Coding function is used to re-flash the vehicle control modules.It is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts;Provide solutions for the issues of Drivability,Fuel Efficiency,Power Loss,Fault Codes,Durability of Mechanical Parts etc.;Brake the limitations and restrictions;make full use of the car hidden features,like change the chimes on car,set how many times the one-touch signal flickers for one touch,remember settings for Start/Stop systems,and more.

Support Active Test(BI-Directional Control(49.95$/Year/Car Model):

If the actuator is normal,without using the vehicle’s controls,to get a significant boost in effectiveness:
[Turn on the radiator fan|Modulate the throttle|Open/close windows|Operate mirrors|Turn on/off the lights|Turn on/off the sound horn|Test door lock …]

Free Full OBDII Functions:

1.Read extensive current,pending and permanent codes in OBD system quickly

2.Clear detected fault codes and turn off the Check Engine Light efficiently

3.View graphical live data of vehicle’s computer module(s) for easy analyses

4.View the vehicle’s operating parameters at the moment a DTC is detected

5.Read I/M readiness status to have a vehicle inspected for state emissions compliance

6.Perform O2 sensor test to check fuel efficiency and vehicle emissions

7.Read the results of on-board diagnostic monitoring tests for specific components/systems

8.Retrieve the vehicle information of VIN,CINs,and CVNs completely

9.Perform the component Test by allowing initiating a leak test for the vehicle’s EVAP system

4 IN 1 Scientific Data Management:

1.Live Data Stream Graph&Record Data&Diagnosis Record Playback&Print Report

2.The professional vehicle scanner tool can scientific graph data,record data,play back data,freeze frame,and print reports.

3.In the real-time diagnosis process,important diagnosis information can be instantly stored in the memory,including reading of fault codes and frozen frames and real-time data streams.

4.After real-time diagnosis is completed,Diagnosis function record playback,the diagnosis information and process previously saved in the memory can be replayed to facilitate the analysis of various data information.

5.One-click generation of a diagnosis report after diagnosis will help users quickly solve problems,avoid blind maintenance, and save money/time.

How to Register/Update THINKTOOL Mini？

1.Initial Use
2.Turn on the Machine
3.Language Setting
4.Connect WIFI
5.Choose Time Zone
6.User Agreement
7.Create an Account
8.Typing in Business Information

Product information:

Display Screen:5.99-Inch/TFT(IPS)
Connection:Wi-Fi/Bluetooth
RAM:2G
ROM:32G
Battery capacity:3100mAh 7.6VWorking Temperature:32℉~122℉
Storage Temperature:-4℉~144℉

1xThinktool mini Host
1xDiagnostic dongle
1xCharging cable
1xpower adapter
1xUser Manual

Thinktool mini